admin

For HPPC test, you can refer to FreedomCAR test manual for detail: http://avt.inl.gov/battery/pdf/PLUG_IN_HYBRID_Manual%20Rev%200.pdf. According to the test situation mentioned in the manual, Neware BTS4000 enables you to record data for those pulses at high frequency and for rest at a relatively low frequency without generating many unnecessary data. And DCIR value is easily handled by marking the DCIR records Download

Read more

There are two kinds of test operations to test the battery DCIR, one is the pulse DCIR test and another one is the step DCIR test.Pulse DCIR test operationFor pulse test setup, please refer to this article firstly: https://newarebattery.com/pulse-test-on-neware-bts4000-and-igbt/Operation standard of pulse DCIR test: At 0.2C working current the battery works 10s, and at 1C battery works 1s. The following

Read more

Pulse testNecessary Software：(For pulse test, BuildTest software is necessary if you are using BTS7.6.x. But if you are using BTS8.0, then the internal step editor of BTS8.0 can be used to create pulse test directly.) (Suppose we are using 5V6A tester)1. Check the voltage and current range of testerWe must check the voltage and current range of tester before editing

Read more

The sampling frequency of Neware battery tester series can be up to 100Hz or even 1000Hz, which means a huge amount of data could be retrieved in a very short time, this is helpful when customers want to use Neware testers for high C-rate or pulse test. While, for long time cycle life tests, this high-speed sampling frequency might bring

Read more

works for laptop batteries with SMBUS、I2C protocols. 400kHz high-speed mode supported.All eight channels are independent, they can do different tasks or same task synchronically.Main specs of BTS-5008-24V15A:Voltage output range: 2.5V-24VCurrent accuracy: 0.03% of FSVoltage accuracy: 0.02% of FSCurrent response time(10%-90%): <=20msData sample frequency: up to 100Hz(10ms)Cabinet dimension: 500 * 480 * 86mmCompatible with ‘Smart Battery Data Specification Revision 1.1’.Compatible with

Read more

Warning: Removal of cabinet panels may result in serious injury or even death. Cabinet panels should only be removed by qualified personnel.When working with controller boards or any other electronic boards in the system, either changing them out or just troubleshooting, be sure to take static precautions, such as:· Keep all electronics in static-free bags.· Work on static-free mats.· Wear

Read more

Sometimes customers would ask why there are so few information in the Neware BTSDA. In BTSDA detailed data record area, there are three kinds of data display forms: Cycle layer, Step layer and record layer. What’s more, in different layers, the information and parameters for displaying you can select are different.

NDA(Neware data analysis) is the default format file which generated by Neware testers, while some customers would like their data to be xls or plaint txt format. Today we are going to talk about xls(excel) format data generation in Neware BTSDA. Firstly, i would like to introduce six excel report formats to you.Visible report: The exported data is the data

Read more

If you have followed BTS4000 connection tutorial carefully but still failed to make the connection between BTS4000 and your computer. Then the following trouble-shooting might help you. Problem 1: No mid machine controller under 127.0.0.1 If there’s no BTSxx under 127.0.0.1, usually it means the connection between Neware mid machine controller and your pc is not working yet. Then please

Read more

Each year, AABC Europe brings together a global audience of battery technologists from leading automotive OEMs and their key suppliers for a must-attend week of development trends, breakthrough technologies and predictions of the market for years to come. As more European nations and international automotive OEMs make their own commitment to vehicle electrification and eMobility, we are excited to carry

Read more